This red plastic second hand is designed to enhance the functionality and aesthetics of your clock. Perfect for clocks with radio-controlled movements, it ensures accurate timekeep..
Beco holder in high version model allows to hold leather or metal bracelets in a certain position, for example to drive in or drive out pens.
Size: 30 x 50 x 50 mm
Suitable for..
Beco holder in flat model allows to hold leather or metal bracelets in a certain position, for example to drive in or drive out pens.
Size: 40 x 55 x 55 mm
Suitable for: Thick ..
The pin fix makes shortening metal bracelets easier. With this tool you can both eject band pins and unscrew screws. The vertical guide facilitates perfect alignment with the brace..
Beco antistatic protect the workplace from scratches, it is made of soft plastic and therefore particularly flexible. Due to the non-slip material on the bottom prevents slipping o..
Rotatable base with 9 screwdrivers. The chrome-plated brass screwdrivers have a non-slip shaft and swivel heads. The steel blades are interchangeable.
Included screwdrivers:
- Ø ..
Pre-owned minute recording runner wheel, mounted part for chronograph watch with manual-winding movement of Valjoux caliber 7734.
Part number: 8020
Also used in calibers: 7733..
This tool was designed to make watch hand fitting as simple as possible
Although this is just a stand, it is a generic model. The size of the hole is 8.0mm. It can support Bergeon..
Pre-owned setting lever spring part for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: 445
Also used in caliber 476...
Pre-owned ratchet wheel part for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: 415
Also used in caliber 476...
Pre-owned setting lever part for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: 443
Also used in caliber 476...
Pre-owned crown wheel part for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: 420
Also used in caliber 476...
Pre-owned set of 12 screws for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: N/A
Also used in caliber 476...
Pre-owned reversing wheel part for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: 1488
Also used in caliber 476...
Pre-owned setting wheel part for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: 450
Also used in caliber 476...
Pre-owned yoke part for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: 435
Also used in caliber 476...
Pre-owned winding pinion part for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: 410
Also used in caliber 476...
Pre-owned barrel bridge part for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: 106
Also used in caliber 476...
Pre-owned pallet cock part for Jaeger-LeCoultre watch with automatic bumper movement of Jaeger-LeCoultre caliber 476/2.
Part number: 125
Also used in caliber 476...
Pre-owned seconds hand part for Longines watch with automatic movement of Longines caliber 507.
Part number: N/A
Also used in calibers: 501, 503, 505...
Pre-owned sweep second wheel part for Longines watch with automatic movement of Longines caliber 507.
Part number: 227
Also used in calibers: 501, 503, 505...