Quick changing apparatus for watches using MT capacitors (1,5 V), suitable mainly for Citizen, Miyota, Seiko and Swatch group brand movements. This tool can only be used for rechangeable capacitors and not for common silver oxide and lithium watch button cells!

Technical details:

Dimensions (L x W x H): 115 x 85 x 65 mm
Weight: 100 g

Instructions for use:

• Remove the discharged battery from the watch or take a new, unused battery before you install it in the watch or sell it.
• Connect the 12V power supply to the power grid and the small plug of the adapter to the unit.
• Press the crocodile clamp and the diode switches to full brightness to indicate when the battery is fully charged.
• Place the battery under the crocodile clamp (+ down, - up):
• The diode shows full brightness = The battery is full and you can remove the battery.
• The diode shows medium brightness = The battery is not fully charged. Leave the battery on the device, the charging starts. Wait until the diode iluminates again with high intensity (duration approx. 30-60 min.). Remove the battery when charging is complete.
• The diode lights up weakly = The battery is almost completely discharged. Leave the battery on the device, the charging starts. Wait until the diode iluminates again with high intensity (duration approx. 60-120 min.). Remove the battery when charging is complete.
• Remove the adapter from the power grid after use.

Supplier/Part #:609659

---